We have created a typical specification to support our softwood timber decking customers mainly designers, architects, specifiers from various organisations e.g RIBA, BALI. We provide free support and samples to our bulk wholesale customers in the UK and Ireland i.e Contractors, Timber and Builders Merchants, Importers arranging deliveries of mixed or full loads.
Softwood timber decking is ideal for both internal and external, joinery applications.It remains the most commonly used natural type of wood decking. It can be used at ground level, as floating deck above ground or as a raised decking on roof-tops, terraces etc. Treated Softwood timber decking can be used on public, and domestic areas, e.g. ramps, bridges, footpaths, walkways, balconies, steps- refer to your building regulations and planning permission for guidelines on the public use and local authority requirements.Is easy cut and to easy to fix, see our installation guidelines.
There is a very large selection of different patterns or profiles softwood decking can be supplied in, e.g. smooth, ribbed, reeded, grooved, castellated, reversible or bespoke to special etc see some of our stock profiles It can be supplied with anti-slip slip resistance properties to give better grip underfoot.
Depending on the intended use area e,g external we can pressure treat, e.g. tantalised, vac-vac to enhance its durability or improve water repellence with a wax additive. We also can supply the decking factory finished painted.Puiduloda SUNDECK_A4_ENG_parand_2
It can be stained, painted, waxed, oiled to enhance its finished look. Our quality is AB Grade Quality request for images/samples to establish a comparison to BS EN 942:2007 Timber in joinery. General requirements Quality classes J2,J5,J10,J20,J30,J40,J50
European Redwood – Pine Red deal is our material of choice for external applications where pressure treatment is required. The pine we supply is slow grown, and from Nordic regions and of good quality, it is important to specify this. The minimum service life of our decking if well installed and specified above ground is 15years. We also supply Siberian Larch decking that is naturally durable and does not need any preservative treatment above ground.
Standard and with anti-slip decking (enhanced grip / slip resistance)
The following content references this product:
[Standard Timber Decking see common profiles]
Nominal, Nom. 25mm,32mm,38mm
Finished Fin. Size 15 mm, 21 mm, 28mm and 33 / 34 mm
Nominal, Nom. 100mm, 125mm and 150mm
Finished Fin. Size 95mm, 120mm,145mm
Planed all round.
Addition of Anti-Slip slip-resistant inserts
Standard product features
Softwood. Redwood Pine / Red deal,
ISO 9001 Quality Management System Certification of Organisation
If untreated and being used internally the sapwood is creamy-white to yellow in colour, and the heartwood is pale yellowish-brown to reddish-brown, resinous, and usually distinct from the sapwood. For treated softwood decking this will depend on the chosen type and application- the popular colour types are green or brown (tanalised,tanatone,vac-vac,protim, osmose Koppers micro-shades, Celcure AC500, Micropro, Aquatan, Wolmanit, Wolsit , Tanalith E etc)
Nordic Regions, Europe, Russia and Northern Asia.
Density (16–18% moisture content):
Only top quality stainless steel fixings should be used to avoid corrosion of fixings and blue staining of the profile.
2.1mtr to 6.0mtr lengths typically offered. Other lengths in 300 mm increments can be provided as well as precision end trim lengths in packs or bundles
Anti-slip insert strips:
– Two – for residential use and commercial use:
United Kingdom Slip Resistance Group (UKSRG) guidelines, e.g. minimum 75,85, 94,98,100 etc Pendulum test values (PTV). The most popular is Anti-slip / non-slip aggregate strips on any timber profile smooth, reeded, grooved, ribbed, castellated
This product is associated with the following NBS Create clause:
45-45-95 Softwood deck boards
This product is associated with the following NBS clauses:
Q55 External decks, boardwalks and bridges
Treatment if required any of the following specifications are commonly used although preservative manufactures can develop specifications.
· High / low-pressure treatment,
· Arch Lonza Tanalith, Tanatone, Vacsol, Vac-Vac. Koppers Osmose Microshades, Celcure AC500, Protim, Tanalith E,
Our quality is AB Grade Quality request for images/samples to establish a comparison to BS EN 942:2007 Timber in joinery. General requirements Quality classes J2,J5,J10,J20,J30,J40,J50
Please visit our product videos page for more information on timber cladding, flooring, decking, mouldings/profiles, fire treatment – product, manufacture and installation/fitting instructions.
Product specification contact the manufacturer:
Tel: (UK) +44 7480317198
Estonia GSM +372 5248 823
Tel: Estonia + 372 433 8690